M6DXAP - M-System M6DXAP Euro Terminal Ultra-Slim Signal Conditioner; M6D Series; DC/Frequency...
- Part Number:
- M6DXAP
- Model Number:
- M6DXAP
- Make:
- M-SYSTEM
- Lead Time:
- Available
- Qty In Stock:
- Available
M-System M6DXAP Euro Terminal Ultra-Slim Signal Conditioner; M6D Series; DC/Frequency Converter (PC Programmable) Simple Type: Signal Conditioning
Signal conditioners convert a field signal from various sensors into standard signal suitable for processing in PLC, DCS or PC-based systems. They are also used to boost a signal to increase load drive capability, to isolate a signal to stop ground loops. More than 75000 combinations of process signal I/O, power input and mounting configuration are selectable. Additionally, M-System offers the broadest line of signal splitters available. The M6DXAP is an ultra-slim, space saving, low power consumption, high performance transmitter with wide selection of input and output ranges.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 3-port isolation
- 5.9-mm wide ultra-slim design
- CE marking
- Converts a DC input into a FM (frequency modulation) or PWM (pulse width modulated) signal
- High-density mounting
- Low profile allows the M6D module mounted in a 120-mm deep panel
- PC programmable
- Power and status indicator LEDs
Specifications
- Accuracy: Input accuracy + output accuracy Inversely proportional to the span
- Applicable wire size: 0.2 to 2.5 mm2
- Configurator connection: 2.5 dia. miniature jack; RS-232-C level
- Dielectric strength: 2000 V AC @1 minute (input to output to power to ground)
- Housing material: Flame-resistant resin (black)
- Input and output: Euro terminal (torque 0.3 N•m)
- Input conversion accuracy in percentage of input span: ±0.01 % for -1000 to +1000 mV; • ±0.01 % for -10 to +10 V; ±0.02 % for 0 to 50 mA
- Insulation resistance: Greater than or equal to 100 M Omega with 500 V DC
- Isolation: Input to output to power
- Line voltage effect: ±0.1 % over voltage range
- Mounting: Installation Base (model-M6DBS) or DIN rail
- Operating humidity: 30 to 90 %RH (non-condensing)
- Operating temperature: -20 to +55°C (-4 to +131°F)
- Output accuracy at max. frequency (FM): ±0.10 % for less than or equal to 10 kHz; • ±0.05 % for less than or equal to 5 kHz; ±0.02 % for less than or equal to 1 kHz
- Power consumption: Approx. 1 W
- Power input: Via the Installation Base (model- M6DBS) or Euro terminal (torque 0.3 N•m)
- Power LED: Green light turns on when the power is supplied.
- Response time: 0.1 sec. + 1 pulse cycle of 100 % output
- Span adjustment: 98 to 102 % (PC programming)
- Status indicator LED: Orange LED; Flashing patterns indicate different operating status of the transmitter.
- Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. input span
- Weight: 65 g (2.3 oz)
- Zero adjustment: -2 to +2 % (PC programming)
Applications
- None Available
Aliases
- None Available
Related Items
MD2200-D12-V1.04
M-System MD2200-D12-V1.04 Disk On Chip
M2D
M-System M2D Mini-M Series Super-Mini Signal Conditioners; Current Loop Supply
M6DXR
M-System M6DXR Euro Terminal Ultra-Slim Signal Conditioner; M6D Series; RTD
M6DXM
M-System M6DXM Euro Terminal Ultra-Slim Signal Conditioner; M6D Series; Potentiometer